The bearing breaks right after being installed, is it a bearing quality problem

wallpapers Industry 2020-10-27

Bearings are compared with general mechanical parts. Because of their very high manufacturing accuracy, they have certain requirements for installation and use. If you don’t pay much attention to them, they will cause damage to the bearings. The normal bearing life cannot be obtained, and related parts will also be caused. The breakage. Generally speaking, accidents caused by bearings are caused by improper installation and irregular use. Therefore, if they can be installed and used in the correct way, the service life of the bearing can be improved.

When installing bearings, the most important thing is to keep the bearings and related parts clean and to use the installation tools and methods correctly. Therefore, the following precautions must be observed:

1. Clean the work area and use clean tools or auxiliary tools to work.

2. When installing, use auxiliary tools with good plasticity and not easy to fall off.

3. Confirm that all assembled parts are qualified products.

4. The bearing can be unsealed until it is used.

5. Keep the bearings clean during operation.

6. Under normal circumstances, the anti-rust oil does not need to be washed off and can be installed in the original state. If lubricating grease is needed, clean the grease on the bearing with gasoline, and then blow it clean with an air gun.