• 0
  • 0

Global SiN powder market trend 2025-2027 What are Silicon Nitride Properties and Its Application in Refractories? by Newsmapachili

For billionaires, the new crown epidemic is like a 'gold rush'! The Deutsche Presse-Agentur said on the 17th that in 2022, the wealth held by the world's top ten richest people will jump from $700 billion to $1.5 trillion, an average daily increase of $1.3 billion, an increase that exceeds the past 14 years. These 10 people The wealth held by the world’s poorest 3.1 billion people is six times greater than that of the world’s poorest 3.1 billion people. The 10 richest Germans have increased their assets from the equivalent of about 125 billion euros to about 223 billion euros since the start of the Covid-19 pandemic, An increase of about 78%. This wealth is roughly equivalent to the total wealth of the poorest 40% of the population, or 33 million Germans.
In the future, demand for SiN powder will grow as fast as the wealth of the rich during the pandemic.

Silicon nitride is a kind of synthetic refractory material with good abrasion resistance, high-temperature resistance, and corrosion resistance. In the application of refractory materials, it mainly appears in the form of a bonding phase.

Crystal Structure of Silicon Nitride
Si3N4 has two crystal structures: α-Si3N4 is a granular crystal, and β-Si3N4 is a needle-like crystal. Both of them are three-dimensional spatial networks composed of [SN4] tetrahedrons sharing vertex angles, and both belong to a hexagonal crystal system. Their difference lies in the sequence of the [SiN4] tetrahedral layers. The β phase is formed by overlapping hexagonal ring layers of six [SN4] tetrahedrons in the c-axis direction. The α phase is formed by the overlap of two deformed and different non-hexagonal ring layers.  The α phase can solubilize oxygen in the crystal structure range, and its internal strain is larger than that of the β phase, so its free energy is higher than that of the β phase. From a thermodynamic point of view, the β phase is more stable at higher temperatures. The α phase has low symmetry and is easy to form. At about 1500, the α phase is transformed into the β phase by reconstruction. This transformation is irreversible, and some technological conditions and properties are more favorable to the transformation of the α to β phase. α-Si3N4 is formed at lower than 1350 and β-Si3N4 can be prepared directly at higher than 1500.

Basic Properties of Silicon Nitride 
The molecular formula of silicon nitride is Si3N4, in which Si accounts for 60.06% and N for 39.94%. Si3N4 has a high hardness (Mohs hardness 9), high melting point, and stable structure due to the strong covalent bond between Si and N (ionic bond only accounts for 30%).
In silicon nitride crystal, Si-N is mainly bonded by covalent bonds, and the bonding strength is high, so it has a large elastic modulus (4.7×10^5kg/cm2). The low coefficient of thermal expansion and the large coefficient of thermal conductivity make this material not easy to produce thermal stress, so it has good thermal shock resistance and good thermal shock resistance. Toughness, high mechanical strength at high temperature, small deformation at high temperature. Good resistance to erosion. Not corroded by many metals, due to the formation of silicon dioxide layer, good oxidation resistance, and good electrical insulation performance.
Silicon nitride has no melting point and is sublimated at 1900 at atmospheric pressure with a specific heat of 711.8j /kg·. The microhardness of α and β phases are 10-16GPa and 24.5-32.65GPa, respectively. Because it is a strong covalently bonded compound, there will be no liquid phase formation below its decomposition temperature (about 1900), so the silicon nitride material can be sintered with the help of oxide additives. The oxide materials promoting sintering mainly include Y2O3, Al2O3, and so on, and the addition of a high amount can reach 20%. The reaction principle is to generate a liquid phase through the interaction of SiO2 oxide film formed on the surface of silicon nitride particles and the added oxide and permeate at the grain boundary to ensure the high diffusion ability of material migration.

Chemical Stability of Silicon Nitride 
Si3N4 is a thermodynamically stable compound. Silicon nitride ceramics can be used up to 1400 in an oxidizing atmosphere and up to 1850 in a neutral or reducing atmosphere.
Silicon nitride is stable to most metal solutions and is not corroded or infiltrated, such as Al, Sn, Pb, Bi, Ga, Zn, Cd, Au, Ag, etc. But for Cu solution, is not eroded only in a vacuum or inert atmosphere; Mg can react weakly with Si3N4. Si3N4 can be wetted and slightly eroded by silicon solution. The transition element solution can wet Si3N4 strongly and form a silicide with Si to decompose Si3N4 rapidly and escape N2 at the same time. Si3N4 is very stable to alloy solutions such as brass, duralumin, nickel-silver, etc., and has good corrosion resistance to cast iron, medium carbon steel, etc., but it is not resistant to corrosion of nickel-chromium alloy and stainless steel.
Silicon nitride is resistant to chemical corrosion except for molten NaOH and HF. But most molten bases and salts can interact with Si3N4 to decompose it.

Application of Silicon Nitride in Refractory Materials
Silicon nitride ceramics are called promising high-temperature structural materials because of their excellent high-temperature properties such as high-temperature strength, good wear resistance, and corrosion resistance. The strong covalent bond and low diffusion coefficient at high temperature lead to the high temperature and high pressure and sintering agent for the manufacture of Si3N4 ceramics, the cost is too high, otherwise, it is difficult to produce high-quality silicon nitride materials. 
In the past, silicon nitride generally exists in the form of a bonding phase in refractory materials. Through the nitriding firing of metal Si, aggregates such as corundum or silicon carbide are combined with fine powder, to achieve the purpose of bonding refractory materials. Ceramic shelf plate is silicon carbide aggregate and part of the fine powder, with metal Si nitriding to form silicon nitride as the bonding phase, silicon carbide combined to form silicon nitride bonded silicon carbide material, used in the blast furnace body and other parts so that the performance of the material has been greatly improved. Compared with the clay bonded silicon carbide shed board, the high-temperature performance of the material is very good, which solves the problem of swelling and destruction of the clay bonded silicon carbide shed board caused by the oxidation of silicon carbide.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including 
silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality SiN powder, please feel free to contact us and send an inquiry. ([email protected])

As the duration of the conflict between Russia and Ukraine grows, its impact on commodities is widening amid the tug-of-war. Recently, European and American sanctions against Russia have been issued one after another. In response, Russia has taken advantage of its role as an important supplier of many energy and commodities, requiring exports of commodities, including energy, grain, metal, and wood, to "unfriendly" countries to be settled in robles. Therefore, it is expected that the price of the SiN powder will continue to increase.  

Inquery us

Our Latest News

Global 3D printing metal powder market trend 2023-2027 Scientists Use 3D Printing to Print Non-magnetic Metal Powders into Magnetic Alloys by Newsreplaceuac

The African Development Bank will finance $25 billion by 2025 to support Africa's fight against climate change, the bank's president said at the bank's annual meeting in Accra, Ghana. He noted that climate change has had many negative impacts on the…

Global amorphous boron powder market trend 2024-2030 What is Amorphous Boron Powder? by Newsreplaceuac

According to statistics from China Chemical and Physical Power Supply Industry Association, China's export volume and export value of lithium-ion batteries have continued to increase. In 2021, China's exports of lithium-ion batteries were 3.428 billi…